Issue link: https://docs.hic.us/i/445631
107 To adjust finishing of sewing Chapter 5 1 2 3 4 5 6 7 8 9 10 11 SQ01 7-1-2. Explanation for operation The following is an example that correcting value of crosswise direction is set to "0.3". (1) To open screen (2) To select correcting value in crosswise 7-2. To adjust stitch length of satin stitch (Satin Stitch) 7-2-1. Explanation on the screen [a] Whole: All satin stitches in the design are targets. Part: Satin stitches of the section surrounded by satin stitch codes (Satin_S to Satin_E) are targets. It is necessary to add the satin stitch code if it is not in the design. [b] 1/2 of the value will be added to both sides of stitch length. 4 Backlash 0.3 3 Satin Stitch F1 Whole Expansion 0.0 Range Whole/Part -1.0 +1.0 [mm] [b] [a] Applicable range Adding amount Before enlargement After enlargement 0.2 Example of the value in +0.4 mm 0.2