Issue link: https://docs.hic.us/i/445631
108 To adjust finishing of sewing Chapter 5 RR06 7-2-2. How to operate The following is an example that applicable range is set to "part" and adding amount is set to "+0.4". (1) To open screen (2) To select applicable range (3) To select adding amount 7-3. To divide a long stitch (Auto Jump) This function makes the frame movement to divide by jump automatically when a stitch length exceeds a setting value. This function reduces the load generated at the frame drive due to heavy weight of the material to be embroidered. However, dividing by jump will reduce embroidery efficiency. 7-3-1. Explanation on the screen 3 Satin Stitch Part +0.4 2 Auto Jump F1 4.0 240 240 360 [ ] NO/2.0 [mm] 9.9 NO YES/NO Frame Drive Keep up R.P.M. Setting for auto jump NO: Not to perform 2.0 to 9.9: The machine will jump automatically when a stitch exceeding a set value is given. When a value is 4.0, the machine will jump automatically if stitches of 4.1 mm and more are given. When the setting of frame type is set to "Auto Clamp Frame", setting range is 2.0 to 5.0 mm. R.P.M. at Auto Jump Yes: To keep (remaining in high speed) NO: Not to keep (speed reduction according to a stitch length) Timing to start moving the frame (p.114) Start Timing