Issue link: https://docs.hic.us/i/445631
116 To adjust finishing of sewing Chapter 5 PT10 7-7-2. How to operate The following is an example that remaining length of upper thread is set to "B" after start sewing. (1) To open screen (2) To select remaining length of upper thread after start of sewing 7-8. To adjust stitching length according to a stitch length (Frame drive adjustment) This function applies to 2 or more head machines. 7-8-1. Explanation on the screen Stitch length tends to be increased in [-] value and decreased in [+] value in general due to characteristic of the machine. However, this aptitude may not be applicable depending on setting condition of other items and/or machine condition. 10 Upper Thread Lock Timing B 0 3 Frame Drive Adjustment Frame Type Tubular X 4mm 12mm Y 4mm 12mm 0 0 0 -3 +3 -3 +3 -3 +3 -3 +3 Set F2 [a] "Frame Type" selected now (p.151). The following values can be memorized at every "Frame Type". [b] [c] [d] [e] To adjust stitch in crosswise direction of around 4 mm finely Stitch in crosswise direction of around 12 mm Stitch in lengthwise direction of around 4 mm Stitch in lengthwise direction of around 12 mm -3 +3 0 Increase Decrease