Service Documents

MX INSTRUCTION

Issue link: https://docs.hic.us/i/445631

Contents of this Issue

Navigation

Page 14 of 263

Safety Precautions 2 Chapter 1 PT10 1. Safety Precautions 1-1. Warning To prevent accidents resulting in injury or death and physical damage, the following items must be observed strictly when operating the machine. This machine is designed for industrial use. Use this machine for semi- or finished textile products and similar materials. Using the machine for other purposes must be avoided. Do not stand on the machine. Using the bar switch as a grip to support yourself is strictly prohibited. Do not use a device such as a cellular phone that generates microwave near the control circuits of the power supply box, the operation panel box, etc. Microwave may cause malfunctioning of the machine. Do not remove the covers for the shaft and the pulleys. Also, do not run the machine without the covers. Do not have your hands, etc. access to the vicinity of needle during operation. Sticking of needle could injure you. During operation, do not access your hands and/or face to moving sections. Especially, it is dangerous around needle, rotary hook, take-up lever, pulley and speed-reduction box. This machine uses strong magnet. The person, who is mounted with internal implantable medical electronics like a pacemaker, should not use this machine. The person who is mounted with a equipment described above also should not access to magnet inside of this machine. This internal equipment could malfunction. Please read this book thoroughly and understand the contents of operation certainly. Then, operate the machine. Wear proper clothes and tidy up yourself so that you can smoothly perform the operation. A single operator should operate the machine in principle. If plural operators are working together, make sure that no one is working near the moving units of the machine before starting the machine. Use the machine under the environment where access can be supervised so that unauthorized person does not operate the machine. Supervise children so that they do not access to the machine. Only the persons who are sufficiently trained for the operation must operate the machine. The rear of the machine is not a working area. If you have to move to the rear of the machine, make sure to turn off the main switch. ! WARNING

Articles in this issue

view archives of Service Documents - MX INSTRUCTION