Service Documents

MX INSTRUCTION

Issue link: https://docs.hic.us/i/445631

Contents of this Issue

Navigation

Page 168 of 263

156 To return the frame to the original position Chapter 6 PT10 3-2. To return moved frame to original position and start operation (Frame return movement after manual frame travel) This function is effective only when the frame is moved manually after stopping the machine in the middle of embroidery. 3-2-1. Explanation on the screen [a] Setting to return/not to return the frame by operating the bar switch or the start switch YES: The frame will return to the original position and the machine will start operation. NO: The frame will not return. The operation will start from the position after frame travel. 3-2-2. How to operate The following is an example of returning the frame to the original position and starting the operation. (1) To set to main screen (2) To press F2 key while pressing SET (3) To press F2 key (4) To return the frame by operating the bar switch or the start switch, and start working. NO [a] 6 Return the frame after manual frame travel Frame movement SET + F2 screen will be displayed. 6 Return the frame after manual frame travel NO YES

Articles in this issue

view archives of Service Documents - MX INSTRUCTION