Issue link: https://docs.hic.us/i/445631
159 To return the frame to the original position Chapter 6 1 2 3 4 5 6 7 8 9 10 11 QS12 3-4-2. How to operate The following is an example of executing Frame origin memory. (1) To set to main screen (2) To press F2 key while pressing SET (3) To press F2 key (4) To execute Frame origin memory 3-5. To perform Frame origin memory when the power is turned ON (Frame origin memory with the power-ON) This is the setting to display the message and execute Frame origin memory in the following conditions. This function does not apply to L-spec. machine. (1) When the power is turned ON (2) When releasing sleep mode (3) When "Frame type" is changed When the embroidery is on the way or the main shaft is out of the fixed position, the message will not be displayed. When performing this operation, do not put your hands etc. on the machine table. Moving frame could injure you. ! CAUTION SET + F2 screen will be displayed. 9 Frame Origin Memory Pressing SET will move the frame. Frame origin memory "YES" >> SET is executed.