Issue link: https://docs.hic.us/i/445631
166 To move the frame to the position registered Chapter 6 QS07 5-2-2. How to operate The following is an example when inserting the offset mark between step 2 and step 3. (1) To open screen (2) To select the step to insert the offset mark (3) To insert the offset mark To delete the offset mark 5-3. To return the frame to the offset start position manually (Return to the offset origin) This function makes the frame return to the offset start position in the middle of emboridery when you stopped the machine. It it possible to operate only when automatic offset is set. The offset middle position is not passed. 5-3-1. Explanation on the screen 2 Needle Bar Selection 2 9 3 1 2 9 3 1 Blinking 2 9 3 1 Blinking 6 Return to the offset origin To return the frame to offset start position : Not to execute : To execute