Service Documents

MX INSTRUCTION

Issue link: https://docs.hic.us/i/445631

Contents of this Issue

Navigation

Page 202 of 263

190 To make optional device available for use Chapter 8 PT10 1-2. Automatic lubrication system This is a setting for making Automatic lubrication system available for use. For details of the device, refer to the separate manual "Automatic lubrication system". 1-2-1. Explanation on the screen [a] Type of device YES: Type to lubricate to inside of the arm and to rotary hook (LB I) Arm: Type to lubricate to inside of the arm only (LB II) NO: Without device [b] Lubrication cycle to rotary hook When counting reaches the number of set stitches, the machine will lubricate to the rotary hook (recommended value: 50000). [c] Lubricating cycle to inside of the arm When counting reaches the number of set stitches, the machine will lubricate to the inside of the arm (recommended value: 150000). -: Not to lubricate 1-2-2. How to operate The following is an example that the lubrication cycle to the rotary hook is set to "50000" in case of type to lubricate both to inside of the arm and rotary hook. (1) To open screen (2) To select the type of device F3 YES/ARM/NO YES 6 Lubrication [st] Lubrication Cycle (Rotary hook) 100000 [st] Lubrication Cycle (Arm) 100000 [a] Type of device [b] Lubrication cycle to rotary hook [c] Lubricating cycle to inside of the arm 6 Lubrication YES

Articles in this issue

view archives of Service Documents - MX INSTRUCTION