Issue link: https://docs.hic.us/i/445631
202 To set details of optional device Chapter 8 RR06 2-2. Sequin Device IV Set the detail of the device. 2-2-1. Explanation on the screen [a] Feed amount of sequin chips of device at left side Select a value that adds about 1.0 to an external diameter of chip as a rough standard. [b] Feed amount of sequin chips of the device at the right side Select a value that adds about 1.0 to an external diameter of chip as a rough standard. [c] Insertion of jump data when a sequin chip is sewn on Select "YES" when sequin chips are not sewn effectually. However, productivity will be decreased. YES: To perform NO: Not to perform [d] Moving up of device at frame stepping YES: To perform NO: Not to perform [e] Feed sequin chips one by one by manual operation. (p.201) The feed amount is the value selected at [a] or [b] mentioned above. L: Device at the left side R: Device at the right side Selecting "NO" will increase manufacturing efficiency. However, the device could interfere with the frame resulting in its breakage depending on design or frame type to use. F3 2 Sequin NO YES/NO Jump insertion YES Device Up at YES/NO 4.0 4.0 Sequin (L) Sequin (R) [mm] 2.0 23.0 [mm] 2.0 23.0 [a] Setting of device at right side [b] Setting of device at the right side [c] Jump insertion [d] Moving up of device frame stepping Sequin chip feed [e] Feed sequin chips one by one. ! CAUTION