Issue link: https://docs.hic.us/i/445631
205 Functions concerning optional device Chapter 8 1 2 3 4 5 6 7 8 9 10 11 RR06 (4) To use Air pressure sensor 3-2. To reverse the 1st color and the 2nd color in sequin device III (Data conversion for sequin output) This is the setting not for replacing by removing sequin but for reversing sequin on the design data all at once when you desire to replace sequin of the device L1 and L2 (the right figure). This function is effective only for the step selected with sequin needle against step of sewing sequin. 3-2-1. Explanation on the screen YES Left side L1 L2 R2 R1 Right side Group1 Group2 Group3 Group4 Group5 9 Data conversion for sequin output 1 ****** **** *** L1< > L2 9 Data conversion for sequin output R1< > R2 Folder and Design stored in the memory of the machine The memory of the machine means the folder and the design stored in "Data Input (Memory)".(p.54) The device L1 (1st color) and L2 (2nd color) at the left side will be replaced each other. Thus, "Sequin_O" in the design data will be replaced with "Sequin _O_2" or vice versa. Sequin_O (Sequin output): 1st color Sequin_O_2 (Sequin output 2): 2nd color The 1st color (L1) and the 2nd color (L2) in the device at the right side will be replaced each other.