Issue link: https://docs.hic.us/i/445631
207 Functions concerning optional device Chapter 8 1 2 3 4 5 6 7 8 9 10 11 RR10 3-3. To change color by using DST design in sequin III (Needle bar selection) This setting enables color change on Sequin device III (corresponding to sequin code Sequin_O and Sequin_O_2) by using DST design (corresponding only to sequin code Sequin_O) that is originally used for single color. After inputting data of DST design, sequin code (Sequin_O) will be allocated to "1" in the right figure. It is possible to switch "1" and "2" in unit of step by this operation. 3-3-1. Explanation on the screen [a] Setting example of color change When saving data after change to a USB memory, display of "Needle Selection" on the operation panel will be switched as shown below figure. At the same time, data of the design (the memory of the machine) will be also edited automatically, and sequin code in the design will switch from "Sequin_O" to "Sequin_O_2". Sequin_O Sequin_O_2 1 2 1 2 Left side Right side 2 Needle Bar Selection 1 2 3 4 5 6 5 B 1 8 1 [a] Setting for color change of device Left side In case of sewing by "1" Left side In case of sewing by "2" 4 12 Select the last needle 4 12 Select the last needle Right side In case of sewing by "1" Right side In case of sewing by "2" 4 1 Select the first needle 4 1 Select the first needle Left side Right side 1 2 1 2 4 12 4 12