Service Documents

MX INSTRUCTION

Issue link: https://docs.hic.us/i/445631

Contents of this Issue

Navigation

Page 38 of 263

26 How to use each part Chapter 2 QS12 2-3. Emergency stop switch Emergency stop switch is equipped as a measure for safety. Pressing this switch will stop the machine. Since the switch is in the locked state, release it according to the following procedure. After releasing, the operation can be started as usual. 2-4. Needle Base LED Lamp Needle Base LED Lamp is equipped to the single head machine. It is possible to turn ON/OFF Needle Base LED Lamp by the switch. Spec. of the machine Condition after stop How to release EN-spec. (European safety spec.) The power is turned OFF. (1) Turn the switch clockwise. (The power will be turned ON). (2) Start the operation. Excluding EN-spec., and Japanese domestic use The machine will switch to the sleep mode. (1) Turn the switch clockwise. (2) Press the sleep mode key. It takes a while until the sleep mode is released. (3) Start the operation. Sleep mode key Needle Base LED Lamp Switch Switch

Articles in this issue

view archives of Service Documents - MX INSTRUCTION