Issue link: https://docs.hic.us/i/445631
Screen display 33 1 2 3 4 5 6 7 8 9 10 11 Chapter 3 QS07 1-5. Design confirming screen It is possible to check setting contents of design starting to embroider from now and/or occurrence records of stop factor(s) (Error Stack). To switch to design confirmation screen, press i key. Pressing again i key will switch to the next screen. To return the original screen, press E key. i key E key Coordinates Stitch Counter Stitch Length Design Counter OFFSET Data conversion Rotation Reversion Repeat M. Repeat 57.0 -56.8 95.2 -7.2 (From Start Point) 1/ 10 3. 10. 5. 7. 2 7 8. 4. 1. 9. 80 10 150.0 pp 185.0 90.0 TAJIMA_W 80 0 10 -130.0 Function Step 1 4 3 5 10 2 Error stuck 14 1000 rpm 600rpm 43210st 280 Cap frame 2 YES YES NO YES 3 4.0 mm YES 30 +2 NO 4 0st NO Maximum RPM Min. Revolution Total Stitch Counter Frame Start Timing Stop at the lower dead point (pseudo-fixed position) Frame Back All Head Sew Frame Type 12 13 6 7 8 9 11 Upper T. Detection Under T. Detection Under T.D. ( Step Ratio ) Auto Color Change (AC) Automatic start (AS) A.S. after Auto Data Set Auto Origin Return Jump Convert Auto Jump Automatic thread trimming (ATH) Tail Length Return Stitches (ATH) Tie Stitches M.shaft Inching after ATH 70% 4 1. Design (of which data is set) to be embroidered from now 2. File name 3. Design size : Design start point (starting position of design) 4. The number of total stitches of design 5. Current frame position Distance from design start point 6. Current number of stitches 7. Contents of the current stitch 8. The number of times of embroidering this design continuously 9. Step(p.57) 10. Enlargement/reduction/reversion of design 11. Repeat of design 12. Current setting contents 13. It indicates the next page exists. Pressing key will scroll the page. 14. Stop factor occurred at last (p.211) Step OFFSET 1/ 10 3. 10. 5. 7. 2 7. 8. 4. 1 9. Automatic offset Current step (red) The number of steps Auto. Color Change Offsetting