Issue link: https://docs.hic.us/i/445631
Message display 35 1 2 3 4 5 6 7 8 9 10 11 Chapter 3 2-1-2. Saving or reading of condition data Condition data can be stored or cannot be stored depending on its place to store. : storable/ : Not storable 2-2. Start position of design 2-3. Offset return Condition data Saving to the memory of the machine Saving to a USB memory Saving from DG/ML by pulse to memory of the machine T3, T2 T 1. Color change order 2. Start position of design [*1] *1: When you embroider the design between the models with different embroidery spaces, the start position of the design may differ depending on the model. 3. Data Conversion [*2] *2: Enlargement/reduction/rotation/reversion of design 4. Repeat of design 5. Automatic offset The message shown left will be displayed only when the machine reads condition data at "2-1.". This message is displayed when setting data of design. Design start position means the frame position where this design was started embroidering last time. OK to move a frame the Start Point of Design Data ? [X:+115.7 Y:-153.2] ''YES''>>SET ''NO'' >> E These figures mean the place to move of the frame. Frame coordinates of it are shown. OK to execute offset return? [X:+65.2 Y:-180.5] ''YES''>>SET ''NO'' >> E These figures mean the place to move of the frame. Frame coordinates of it are shown. The message shown left will be displayed only when the machine has the setting of "Automatic offset" (p.163). This message is displayed when setting data of design. Offset return means the offset start position where this design was embroidered last time. PT10