Issue link: https://docs.hic.us/i/445631
44 Registration of a design into the machine memory Chapter 4 RR06 3. Registration of a design into the machine memory Register a design into the machine memory by the following ways. (1) To use USB memory (2) To use a personal computer (DG/ML by Pulse is necessary) 3-1. To use USB memory (Data Input USB) Register designs, stored in the USB memory, into the memory of the machine. The maximum number of stitches and data capacity per design is 1,000,000 stitches. 3-1-1. Explanation on the screen [a] Layer directory The machine can read the design (down to the fourth layer directory) in the folder located at the third layer directory stored in the USB memory.The total amount of folders or designs which can be read in one layer directory is 255 designs at the maximum. [b] Folder [c] Design 4 Data Input (USB) A Cap frame Border frame T2 TCF ****** **** *** T3 TBF ****** **** *** T DST ****** **** *** T DST ****** **** *** Layer directory [a] Folder [b] Design [c] Folders and designs stored in the USB memory will be displayed. The design except the one shown at left will be displayed depending on the saving format of the design. : First layer directory : Second layer directory : Third layer directory : Fourth layer directory G001.TCF TAJIMA_W 14117 The number of total stitches of design Extension File name (Within 1,000,000 stitches) The extension differs depending on a saving format of the design. T3 : TCF T2 : TBF T : DST For saving format of the design, refer to the detail page.(p.34) Design name T3 Saving format of design (Up to 8 characters)