Issue link: https://docs.hic.us/i/445631
57 Decision of an embroidery design and the color change order Chapter 4 1 2 3 4 5 6 7 8 9 10 11 RR10 4-2. To decide the color change sequence (Needle Bar Selection) This setting is unnecessary when the color change sequence is already included as the condition data in the design to be embroidered from now. 4-2-1. Explanation on the screen [a] Design (of which data is set) to be embroidered from now [b] Step The section divided by color change code in the design data. The first section is called step 1, and the next section is called step 2. Step display differs depending on with/without setting of "Auto Color Change (AC)". When Sequin device III is mounted, the following display appears. [c] Offset mark The illustrated example shows that the frame moves to the front after finishing of step 3 (p.165). However, to move the frame, the setting of "Automatic offset" is necessary (p.163). 2 Needle Bar Selection 1 2 3 4 5 6 5 B 7 9 1 3 2 6 4 [a] [c] Design to be embroidered from now [b] Step Offset mark 1 5 Step No. Needle bar No. Setting color of needle bar The color can be changed per needle bar. (p.137) With setting Without setting 2 1 To perform sewing with the right device 2 9 To perform sewing with the left device Change Sequin 1 and 2. (p.207) (An example of 9-needle machine)