Issue link: https://docs.hic.us/i/445631
59 Decision of an embroidery design and the color change order Chapter 4 1 2 3 4 5 6 7 8 9 10 11 PT10 4-3. To change color automatically / to start operation automatically (Auto Color Change "AC" / Auto Start "AS") 4-3-1. Explanation on the screen [a] Setting to perform color change automatically according to color change order YES: to perform NO: not to perform When you desire to embroider without color change by single color, select "NO". Selecting "NO" will disable the following settings. [b] Setting to start operation automatically after color change YES: to perform NO: not to perform Selecting "NO" will disable the following settings. [c] Setting to start operation automatically when the same needle bar No. is selected at the previous and next steps. YES: to perform NO: not to perform The below example shows that selecting "NO" will stop the operation after step 1 finishes. When you desire to stop the desired step only individually, select "NO". 1 Auto Color Change / Auto Start B AC YES/NO AS YES/NO YES/NO Same Color (AS) NO NO NO [a] [b] [c] Automatic color change Automatic start Same Color (AS) 1 5 Step The same needle bar No. 2 5 3 2