Service Documents

MX INSTRUCTION

Issue link: https://docs.hic.us/i/445631

Contents of this Issue

Navigation

Page 73 of 263

61 Decision of a design start position Chapter 4 1 2 3 4 5 6 7 8 9 10 11 PT10R 5. Decision of a design start position 5-1. To check the design size and the setting contents of the design (Check of design) Check setting conditions such as size, scale up/down, repeat, etc of the design to be embroidered from now. Use the checking result as rough standard when deciding the design start position. This function will be explained in detail on the other page. (p.33). 5-1-1. Explanation on the screen 5-1-2. How to operate (1) To open screen Press i key. Current position Stitch Counter Function Stitch Length Design Counter Step OFFSET Data conversion Rotation Reversion Repeat M. Repeat 0 88.4 0.0 -59.6 59.2 (From Design 1/ 8 3. 10. 5. 7. 2 7 8. 4. 80 3 3 -130.0 pp 0.0 G0041 W-Tajima 14117st 80 100.0 0.0 0 0 Design to be embroidered Repeat of design Scale up/down Size of design (mm) 88.4 -59.6 59.2 Start position of design The size based on the design start position after scaling up/down will be displayed. This example shows the size of vertical 88.4 mm and horizontal 118.8 mm. Start Point) from now / Reversion of design After pressing this key again, setting contents in detail and the code No. occurred up to now can be confirmed. To return to the main screen, press E key.

Articles in this issue

view archives of Service Documents - MX INSTRUCTION