Issue link: https://docs.hic.us/i/445631
77 Embroidery starts Chapter 4 1 2 3 4 5 6 7 8 9 10 11 RR06 After that, restart the embroidery according to the following procedure. (a) Pass the upper thread, or change the under thread (bobbin). (b) Start the operation after performing frame back by several stitches. Starting stitches after frame back differ between the head with thread breakage and the head without thread breakage. [Head with thread breakage] The machine restarts embroidery from the position where frame back stopped (1 in the figure below). As a result, repair stitches will be performed at the position 2 with missing stitches due to thread breakage. [Head without thread breakage (In case of two or more head machine)] The machine restarts embroidery from the position 3 next to where frame back started. This example is for the case "All head sewing after frame back" is set as "0" (p.150). Threader (accessory) Position where frame back started (position where the machine stopped) Thread broken position Frame back section 1 2 Embroidery direction Position where frame back started (position where the machine stopped) Frame back section 3 Embroidery direction