Issue link: https://docs.hic.us/i/445631
83 To trim thread Chapter 5 1 2 3 4 5 6 7 8 9 10 11 SQ01 The more return stitches are, the less mis-stitching at start decreases. [e] Stitch length of [d] described above When "N" is displayed, the value differs in each needle bar (p.109). [f] Tie stitching at thread trimming The more tie stitches are, it prevents fray of thread. [g] Stitch length of [f] described above When "N" is displayed, the value differs in each needle bar.(p.109) [h] Coming-out amount of hook (thread holder) (2 in the right figure) Select B. A: Short B: Long Select "B" for hook. Wrong selection would cause abnormal noise and/or not to hold the thread normally. Without Return Stitches Stitch at start of embroidery 0: Triangle 1 2 3 T0: One reciprocation 1 2 1: Triangle + one reciprocation 1 3 4 5 2 T1: Two reciprocations 1 2 3 4 2: Triangle + two reciprocations 1 3 4 5 2 6 7 T2: Not to perform tie stitching Thread trimming position A: To perform tie stitching after lowering the needle twice on the same position at the end of the stitch Thread trimming position C: To perform tie stitching (once) Thread trimming position B: To perform tie stitching (twice) Thread trimming position D: 2 ! CAUTION