Issue link: https://docs.hic.us/i/445637
To return the frame to the original position 154 Chapter 6 QS07 (4) To execute after thread trimming 3-4. To memorize frame origin (Frame origin memory) Frame origin is an anchoring point (X:0.0, Y:0.0) to calculate the current frame position. Position of frame origin differs depending on model. Perform this function in case of the following condition. (1) There is a possibility that the frame was moved by hand in the state of power OFF or during sleep mode in such a case as changing frame. (2) After installation of software (3) When frame driver is changed When a frame origin is wrong, the following troubles will occur. Frame coordinates are not displayed correctly. The frame does not return to the interrupted position even after performing power restoration. Position of frame limit gets out of alignment (only for single-head machine) 3-4-1. Explanation on the screen ATH Pressing SET will perform thread trimming and move the frame. X: 0.0 Y: 0.0 Frame origin Embroidery space SET 9 Frame origin memory F2 Frame origin memory : Not to execute : To execute