Issue link: https://docs.hic.us/i/445637
To return the frame to the design start position 157 1 2 3 4 5 6 7 8 9 10 11 Chapter 6 QS07 4. To return the frame to the design start position 4-1. To return the frame to the design start position manually (Return to the design start position) This function makes the frame return to the design start position in the middle of embroidery when you stopped the machine. 4-1-1. Explanation on the screen 4-1-2. How to operate The following is an example of executing design start position return. (1) To open screen (2) To execute design start position return When performing this operation, do not put your hands etc. on the machine table. Moving frame could injure you. 4 Return to the design start position To return the frame to the design start position : Not to execute : To execute ! CAUTION 4 Return to the design start position Pressing SET will move the frame.To return to the original position, perform "Manual Offset". (p.151)