Issue link: https://docs.hic.us/i/445637
To make optional device available for use 191 1 2 3 4 5 6 7 8 9 10 11 Chapter 8 PT10 1-6. Boring Device This is a setting for making Boring Device available for use. For details of the device, refer to the separate manual "Boring Device II". 1-6-1. Explanation on the screen [a] Setting of Boring [b] Needle bar No. equipped with device 1-6-2. How to operate The following is an example that Boring device is set to "Step 3" and equipped to the needle bar No. "4". (1) To open screen Value Device Frame travel [*1] *1:When switching to boring, the frame will move by 12 mm in lengthwise direction. Scale up/down, rotation, reversion of design NO Not to use - - Step 1 [*2] *2:Select if there is frame travel data in the design. To use Not to perform Unable Step 3 [*3] *3:Select if there is not frame travel data in the design. To perform Enable F3 NO/Step1/Step3 NO 1Boring Needle No. 1 [a] Setting of Boring [b] Equipped needle bar No. 12 mm 1 Boring