Service Documents

TEMX INSTRUCTION 1.2015

Issue link: https://docs.hic.us/i/445637

Contents of this Issue

Navigation

Page 205 of 247

To set details of the device 193 1 2 3 4 5 6 7 8 9 10 11 Chapter 8 RR07 2. To set details of the device 2-1. Sequin Device IV Set the detail of the device. 2-1-1. Explanation on the screen [a] Feed amount of sequin chips for the device at the left side Select a value that adds about 1.0 to an external diameter of chip as a rough standard. [b] Feed amount of sequin chips for the device at the right side Select a value that adds about 1.0 to an external diameter of chip as a rough standard. [c] Insertion of jump data when a sequin chip is sewn on Select "YES" when sequin chips are not sewn effectually. However, productivity will be decreased. YES: To perform NO: Not to perform [d] Moving up of device at frame stepping YES: To perform NO: Not to perform [e] Feed out sequin chips one by one by manual operation. (p.195) Feed amount is the value selected at above [a] or [b]. L: Device at the left side R: Device at the right side Selecting "NO" will increase manufacturing efficiency. However, the device could interfere with the frame resulting in its breakage depending on design or frame type to use. F3 2 Sequin NO YES/NO Jump insertion YES Device Up at YES/NO 4.0 4.0 Sequin (L) Sequin (R) [mm] 2.0 23.0 [mm] 2.0 23.0 [a] Setting of device at the left side [b] Setting of device at the right side [c] Jump insertion [d] Moving up of device Sequin Chip Feed [e] Feed out sequin chips one by one. frame stepping ! CAUTION

Articles in this issue

view archives of Service Documents - TEMX INSTRUCTION 1.2015