Issue link: https://docs.hic.us/i/445637
Spec. of the machine 223 1 2 3 4 5 6 7 8 9 10 11 Chapter 11 QS07 1-3. Switching of input voltage (Single-head machine only) The following label (either of one) is stuck at the lower part of the power supply card. Only the model on which label No.3 is stuck can switch input voltage. However, since the setting is performed according to your voltage spec. at shipment, it is not necessary to switch input voltage in usual usage. Perform switching of input voltage only in the following condition. (a) When the machine was moved for installation to the place whose voltage spec. is different from that at shipment (b) When you replace power supply card and connection of the connector CN11 is different from your voltage spec. 1-3-1. How to switch Change connection of the connector CN11 on the power supply card. Since there could be danger of electric shock, consult your local distributor before working. Exclusive for single-phase/100 V Label No.1 Single-phase 100 V or 200 V Label No.3 ! DANGER CN11 A Label No.3 [Connection of CN11] In case of 100 V series In case of 200 V series A Power supply card