Service Documents

TEMX INSTRUCTION 1.2015

Issue link: https://docs.hic.us/i/445637

Contents of this Issue

Navigation

Page 31 of 247

How to use each part 19 1 2 3 4 5 6 7 8 9 10 11 Chapter 2 RR10 2-1-3. Back face (1) LAN port Use the LAN port when connecting the LAN cables. (2) LAN cable Please prepare a commercial item. LAN cable is used for connecting a personal computer with the machine. Setting of the operation panel is necessary additionally (p.186). (3) USB port Refer to the explanation of the USB memory at the side face of the operation panel (p.18). When you insert the USB memory, do not mistake the direction of connector. The USB memory and its inside card could be damaged. Do not insert the USB memory in the state that dirt or dust are attached to the inside of the connector. Insert the USB memory slowly and gently. Insert the USB memory upright against the port (insert slot). Oblique insertion could damage to inside card due to interference of connector with the card. Wait for five or more seconds after inserting or taking out the USB memory, and then start operation. It may take about one minute at a maximum to recognize data. ! CAUTION LAN port USB port LAN cable

Articles in this issue

view archives of Service Documents - TEMX INSTRUCTION 1.2015