Issue link: https://docs.hic.us/i/445637
To register a design in the memory of the machine 49 1 2 3 4 5 6 7 8 9 10 11 Chapter 4 RR11 3-2-3. How to operate (to use bar code reader) The following is an example when registering a design (stored in a personal computer) into the memory of the machine. (1) After connecting the LAN cable to the LAN port at the back of the operation panel, start up DG/ML by Pulse. (2) Check if network setting is "YES" (p.186). (3) Connect the bar code reader to the USB port of the operation panel (p.19). (4) To set to main screen (5) To read bar code Condition data (color change order) is also read automatically. This design has become the state that it is possible to embroider (Data set is completed). After that, proceed to "To decide color change sequence (Needle Bar Selection)(p.55)". Please buy a commercial item. TAJIMA_W 14117 0 Reading of the bar code is also possible from the following screen. 4 Data Input (USB) 5 Data Input (LAN) A 1 Data Input (Memory) Bar code Bar codes can be printed by the print function of DG/ML by Pulse.