Issue link: https://docs.hic.us/i/445637
To decide a design to embroider and the color change order 57 1 2 3 4 5 6 7 8 9 10 11 Chapter 4 PT10 4-3. To change color automatically / To start operation automatically (Auto Color Change "AC" / Auto Start "AS") 4-3-1. Explanation on the screen [a] Setting to perform color change automatically according to color change order YES: to perform NO: not to perform When you desire to embroider without color change by single color, select "NO". Selecting "NO" will disable the following settings. [b] Setting to start operation automatically after color change YES: to perform NO: not to perform Selecting "NO" will disable the following settings. [c] Setting to start operation automatically when the same needle bar No. is selected at before- and-after steps. YES: to perform NO: not to perform The below example shows that selecting "NO" will stop the operation after step 1 finishes. When you desire to stop the desired step only individually, select "NO". 1 Auto Color Change / Auto Start B AC YES/NO AS YES/NO YES/NO Same Color (AS) NO NO NO [a] [b] [c] Automatic color change Automatic start Same Color (AS) 1 5 Step The same needle bar No. 2 5 3 2