Issue link: https://docs.hic.us/i/445637
To decide the design start position 64 Chapter 4 RR07 5-4. To check if the design fits in an embroidery space (Trace) Since the frame moves according to the size of the frame, you can check if the design fits in the embroidery space or not. 5-4-1. Explanation on the screen 5-4-2. How to operate The following is an example when executing trace. (1) To open screen When performing this operation, do not put your hands etc. on the machine table. Moving frame could injure you. 1 2 3 4 5 6 7 Start position of design The number in the left picture indicates the path of the frame. After completion of trace, embroidering from that position is possible. When repeat is set The machine will trace the whole designs after tracing the first design. When automatic offset is set The machine traces according to setting. D1 /Low/High Needle position 15 1 Trace Speed of frame travel Low: slow High: fast -: Not to execute Current needle bar No. The frame moves on the basis of this needle bar. ! CAUTION 1 Trace