Issue link: https://docs.hic.us/i/445637
Embroidery starts 73 1 2 3 4 5 6 7 8 9 10 11 Chapter 4 After that, restart the embroidery according to the following procedure. (a) Pass the upper thread, or change the under thread (bobbin). (b) Start the operation after performing frame back by several stitches. [Head with thread breakage] The machine restarts embroidery from the position where frame back stopped (1 in the figure below). As a result, mend sewing will be performed at the position 2 without sewing due to thread breakage. [Head without thread breakage (In case of multi-head machine)] The machine restarts embroidery from the position 3 next to where frame back started. This example is for the case "All head sewing after frame back" is set as "0" (p.146). Threader (accessory) Position where frame back started (position where the machine stopped) Thread broken position Frame back section 1 2 Embroidery direction Position where frame back started (position where the machine stopped) Frame back section 3 Embroidery direction RR07