Issue link: https://docs.hic.us/i/445637
To trim thread 84 Chapter 5 PT10 2-5. To add thread trimming code to the design and trim thread (Data Edit "Insert") This function always executes automatic thread trimming at the same position by adding thread trimming code to the design. A stitch will be inserted before the selected stitch No. When this operation is performed in the middle of embroidery, data set will be canceled. If the stitch having long length is inserted, a design will be displaced hereafter. 2-5-1. Explanation on the screen 2-5-2. How to operate The following is an example that thread trimming code is added to 20th stitch. (1) To open screen (2) To select a design The original design will be overwritten after editing. Back up design data according to need. 1Data edit Delete 1 2 3 4 5 6 7 8 9 10 0 0 Jump 8 4 Stitch 8 3 Stitch 11 5 Stitch 8 8 Stitch 1 13 Stitch -11 2 Stitch -12 -3 Stitch -11 7 Stitch -25 15 Stitch Modify Insert Stitch No. X data (Data to move the frame in crosswise) When a value is 8, the frame travel amount is 0.8 mm. Y data (Data to move the frame in lengthwise) When a value is 4, the frame travel amount is 0.4 mm. Function code (p.225) It is the code to indicate the role of the stitch. ! CAUTION 1 Data Edit TBF 3 ****** **** ***