Issue link: https://docs.hic.us/i/852277
86 Chapter 7 Using Optional Accessories 7 This chapter explains how to use optional accessories. By using a separately sold cap frame, you can embroider visored caps. 1. Attach the base of the ring shaft at the place for installing the ring shaft at the lower part of the bed, and fasten it with the screw. Chapter 7 Using Optional Accessories 7.1 Using the cap frame Caution Please take note of the following things regarding use of a cap frame. Type and size When using a cap frame, you can embroider visored caps. Do not use the following types of items, since the embroidered results will not be good, and it could lead to bent needles and the malfunction of the machine. • Hats that are not of the cap type • Hats made of fabric that tends to get wrinkled or stretches and contracts easily • Hats that are of a size that won't fit in the cap frame (small hats or extremely shallow hats) Range within which embroidery can be carried out When sewing designs using the cap frame, allow at least 10 mm distance from the stitching of the visor, and use only designs that will fit within the embroidery area shown below. • Vertically: 75 mm or less • Horizontally: 300 mm or less Horizontal Vertical Vertical Allow at least 10 mm. Allow at least 10 mm. 7.1.1 Attaching the cap frame unit to the machine Caution Switch power off before starting the following procedure.