Brother

For 1 Minute 1' 5 cm 1' 15 cm 15 cm 5 cm ALIGN NO WRINKLES CLICK PUSH to ROLL it and straight with your hand to avoid wrinkles. Place the pouch in a straight alignment with the cartridge. Align lines with each other! Close the lid, verify if the spring is rolling to the front. Place the cartridge at around 45° and push on the 2 upper metalic latches to add a bit more tension on the ink pouch. Attach a shelf life sticker included with ink pouch onto the front of the cartridge. POUCH REPLACEMENT - VERY IMPORTANT ! POUCH REPLACEMENT - VERY IMPORTANT ! Open the cartridge's lid on a flat surface and remove the empty pouch. Unpack carefully a new ink pouch from its shipping carton. Avoid wrinkling the pouch Push the green tip end of the ink pouch into the cartridge until it clicks into place. Straighten the ink pouch to align it with the gutter of lid of cartridge, and mount in position inside the metal spring by pulling it with your hand. If the edge of the ink pouch is bent or undulating significantly, make flat 5 -FLIP OVER- You can agitate New White Ink still in the box before putting it into the pouches in the same back and forth manner as the cartridges. New ink should be agitated longer 45 secs. each side; doing this while still in the box saves time as both pouches are in the box. 45 secs. 45 secs. If you know your going to print a large order or are low on ink, ensure you have spare ink on hand. Attempting to run the printer dry can damage the unit and keep you from finishing a job as well it can lead to costly repairs! > STORED INK If storing ink for more than one week without use then you should flip the boxes weekly in order to keep ink pigments from settling in the pouch.

• Cover