>
days
7
!
OK
MENU
To achieve a good weekly maintenance you will have to do the following actions:
> WEEKLY MAINTENANCE PROCEDURES
TO BE DONE EVERY WEEK
Suction Cap & Exhaust Cleaning
Exhaust Cleaning Direction to clean Suction Cap Cleaning
> Always use this menu to perfor m cleanings or r eplace parts :
+ Exhaust Cap Cleaning
+ Nozzle Guards Cleaning
+ Suction Cap Cleaning
+ Wiper Blade Cleaning
W E E K L Y M A I N T E N A N C E
WEEKLY MAINTENANCE
The black silicon lips of the two cappings should be cleaned with the Cleaning Stick T
dipped in Cleaning Solution.
It is necessary to remove the built-up of the remaining ink staying on the edges of the
cappings. It will prevent air leakage and keep the good suction of the pumps!
Be careful not to touch the foam! Keep it flat!
The four extrusion lances (see in the blue circle…) and the hole
sitting on the side of the capping at the Exhaust position need
also to be cleaned and free of dried ink.
Always clean first the hole at the front and go backward while
cleaning the lances!
Menu > Maintenance > Maintenance Part Clean/Replace > and follow instructions on the display
30
Min
9
Watch the Video: Cleaning the Nozzle Guard, Wiper Blade,
Suction and Exhaust Caps
