To return the frame to the original position
151
1
2
3
4
5
6
7
8
9
10
11
Chapter 6
PT10
3-4-2. How to operate
The following is an example of executing frame origin memory.
(1) To set to main screen
(2) To press F2 key while pressing SET
(3) To press F2 key
(4) To execute Frame Origin Memory
3-5. To perform Frame origin memory when the power is turned ON (Frame origin memory
with the power-ON)
This is the setting to display the message and execute Frame Origin Memory in the following conditions.
(1) When the power is turned ON
(2) When "Frame type" is changed
When the embroidery is on the way or the main shaft is out of the
fixed position, the message will not be displayed.
When performing this operation, do not put your hands, etc. on the table. Moving the
frame could injure you.
CAUTION
!
SET + F2 screen will be displayed.
9 Frame Origin Memory
Pressing SET will move the frame.
Frame origin memory is executed.
"YES" >> SET
