To stop the machine
88
Chapter 5
PT10
4-4. To stop at Frame Limit (Frame Limit setting)
This is the setting to stop the frame at Flame Limit (movable limit position). To stop at Frame Limit, it is
necessary to be memorized the frame origin correctly by the machine. The position where the frame stops
differs in every "Frame Type". This function is not applicable for L-spec. machine.
4-4-1. Explanation of the screen
[a] Stop at Frame Limit
YES: To stop (usual setting)
NO: Not to stop
Selecting "NO" will not display the following message at data input.
4-4-2. How to operate
The following is an example that the frame is stopped at Frame Limit.
(1) To set to main screen
(2) To press F1 key while pressing SET
(3) To press F1 key
Selecting "NO" will not stop the frame at frame limit. The frame could interfere with the
peripheral part resulting in its breakage.
NO
6 Frame Limit Setting
[a]
Frame Limit setting
OK to move a frame to the
start point of design data ?
[X:+115.7 Y:-153.2]
CAUTION
!
SET + F1 screen will be displayed.
6 Frame Limit Setting
NO
