To adjust finishing of embroidering
97
1
2
3
4
5
6
7
8
9
10
11
Chapter 5
SQ01
7-1-2. How to operate
The following is an example that correcting value of horizontal direction is set to "0.3".
(1) To open screen
(2) To select correcting value in horizontal
7-2. To adjust stitch length of satin stitch (Satin Stitch)
7-2-1. Explanation of the screen
[a] Whole: All satin stitches in the design are targets.
Part:
Satin stitches of the section surrounded by satin stitch codes (Satin_S to Satin _E) are
targets. It is necessary to add the satin stitch code if it is not in the design.
[b] 1/2 of the value will be added to both sides of stitch length.
4 Backlash
0.3
3 Satin Stitch
F1
Whole
Expansion
0.0
Range Whole/Part
-1.0
+1.0
[mm]
[b]
[a]
Applicable range
Adding amount
Before enlargement
After enlargement
0.2
Example of the value in +0.4 mm
0.2
