Issue link: https://docs.hic.us/i/1260917
Message display 27 Chapter 3 2-1-2. Saving or reading of condition data Condition data can be saved or cannot be saved depending on its place to save. ○: Able to save/ : Unable to save 2-2. Start point of design 2-3. Offset Return Condition data Saving into machine memory Saving into USB memory Saving from DG/ML by Pulse into the machine memory T3, T2 T 1. Color change sequence 2. Start point of design [*1] *1: When embroidering the design between models with different embroidery spaces, the start position of the design may differ depending on the model. 3. Data Conversion [*2] *2: Scaling up/down/rotation/reversion of design 4. Repeat of design 5. Automatic Offset The message shown left will be displayed only when the machine reads condition data at "2-1.". This message is displayed when performing data set. Design start position means the frame position where the embroidery of this design was started last time. OK to move a frame to the start point of design data ? [X:+115.7 Y:-153.2] "YES">>SET "NO">>E These figures mean the destination of moving the frame. Frame coordinates is shown. OK to execute Offset Return? [X:+65.2 Y:-180.5] "YES">>SET "NO">>E These figures mean the destination of moving the frame. Frame coordinates is shown. The message shown left will be displayed only when the machine has the setting of "Automatic offset". This message is displayed when performing data set. Offset return means the offset start position where this design was embroidered last time. SQ06