Issue link: https://docs.hic.us/i/1260917
Registration of a design into the machine memory 36 Chapter 4 TP02 3. Registration of a design into the machine memory Register designs in the machine memory by the following methods. (1) Use USB memory (2) Use personal computer (DG/ML by Pulse is necessary) 3-1. To use USB memory (Data Input USB) Register designs saved in the USB memory into the machine memory. The maximum number of stitches per design is 1,000,000 stitches. 3-1-1. Explanation of the screen [a] Layer directory The machine can read the design (down to the fourth layer directory) in the folder located at the third layer directory saved in the USB memory. The total amount of folders or designs which can be read in one layer directory is 255 designs at the maximum. [b] Folder [c] Design 4 Data Input (USB) A Cap frame Border frame T2 TCF ****** **** *** T3 TBF ****** **** *** T DST ****** **** *** T DST ****** **** *** Layer directory [a] Folder [b] Design [c] Folders and designs saved in the USB memory will be displayed. The design except the one shown at left will be displayed depending on a saving format of the design. : First layer directory : Second layer directory : Third layer directory : Fourth layer directory G001.TCF TAJIMA_W 14117 Total stitch number of design Extension File name (Within 1,000,000 stitches) The extension differs depending on the saving format of the design. T3: TCF T2: TBF T: DST For saving format of the design, refer to the detail page. (p.26) Design name T3 Saving format of design (Up to 8 characters)