Issue link: https://docs.hic.us/i/1293163
4 v 1.1 STEP 1 Create your file using GTX Polyester Software. STEP 2 Apply pretreat in 2 layers 1. Open your desired artwork file. 2. Select your printer model from the drop down menu. 3. Click the gear to access the printer driver settings. a. Highlight: The default is '9' (600% white ink). You can select the amount from 400% to 800%. If you are worried about seeing the texture of the fabric than increase the highlight amount to smooth out the printed area. b. Min Whiteness 5 is recommended for smooth polyesters and a Min Whiteness of 2 is recommended for textured/mesh polyester garment. c. If the minimum white ink amount is reduced below the recommended value, the ink may peel off in the dark areas after washing. 4. Click the printer icon to either send directly to the printer or create a print ready file (i.e. ARXP or ARX4) 1. Pretreat the desired area with 22 grams of pretreat after your pretreat machine has been calibrated to spray 22 grams of pretreat based on a 14"x16" . 2. Heat press cure the pretreat - 230° F at 47psi (3.2 bars) for 35 seconds. 3. Pretreat the same area again with 22 grams of pretreat. 4. Heat press again - 230° F at 47psi (3.2 bars) for 35 seconds. THE PROCESS THE PROCESS DETAILS