Connecting to a Water Source
I understand that a water source will need to be available prior to installation. If using a water supply line, the
water source must be free of minerals and contaminants.
GTX600 features an internal humidifier that is designed to maintain an optimal printing environment. As such, water for
the humidifier is supplied via a Water Supply Tube.
The source of water is dependent on the needs of your facility.
Water can be supplied via:
1. A direct line from pure water, such as a tank of distilled water.
2. Via a water pipe, with a regulator and ion filter to ensure clean water.
IMPORTANT
• Water tube dimensions are OD6 mm 1/4inch
• Do not use the optional humidifier water supply tube to connect to tap water piping.
• If non-pure water, such as tap water, is used, white powdery impurities will adhere to
the inside of the unit, causing damage to the printer and heads.
• If using a regulator in the water line setup, ensure that the pressure supplied is
.2PMa or less to the printer.
