Issue link: https://docs.hic.us/i/1453899
11 ADJUSTING THE HEIGHT OF THE PLATEN "PLATEN TOO LOW" SENSORS To ensure optimal print quality when a thicker textile is used, you need to adjust the platen's height in relation to the thickness of the textile. To adjust the platen height, loosen the Platen Fixing Lever (1) and move the Platen Height Adjustment Lever (2) to a lower position. 9L[PNO[LU[OLPlaten Fixing Lever (1) if you are happy with the new height. Smooth out all wrinkles on fabric to be printed on. To check if new textile is not detected by the sensor, push the double arrow platen feed button and repeat the process if needed. If you need the platen to go down further than the lowest setting, YLTV]LVYJVSSHYZSVVZLU[OLknob (3) and push KV^U[OLWSH[LUILHYPUNI`VYZ[LWZ9LH[[HJO everything and tighten the Platen Fixing Lever (1). > Don't forget to adjust the platen lever to position A after printing on thicker material. > Always tighten knob (3) after changing position. Do not overtighten screw as it can become stripped. > If you have to print above hem and seams, go for UNI-directional printing to keep quality. Normal Detecting ;VW3LM[!Obstacle Sensor )V[[VT3LM[!EDP Sensor Excessive Dropping ,YYVY*VKL!2072 If error occurs, press okay. Prior to next print raise platen to optimal platen height. DAILY MAINTENANCE: Nozzle Check 0UVYKLY[VJOLJR[OLZ[H[\ZVM[OLUVaaSLZPU[OLWYPU[OLHKZHNozzle Check must be WLYMVYTLKMVY>OP[LHUK*4@2;OPZZOV\SKILKVULL]LY`KH`[VLUZ\YLVW[PTHSWLYMVYTHUJL How to perform a CMYK Nozzle Check? (S^H`ZWSHJL[OL7SH[LUH[SL]LS( Test Print Menu Nozzle Check CMYK [VWYPU[HJVSVY5VaaSL*OLJR WH[[LYUVUH^OP[LWHWLYZOLL[