4
WHITE INK AGITATION & SEDIMENTATION
NEVER POWER OFF THE PRINTER
VERY IMPORTANT
The Brother GTXpro B should ALWAYS
be left with the Power ON. NEVER shut
OFF the printer except if requested by the
display message only. Power is needed to
perform the needed circulation of the white
ink and auto maintenance every day.
In the event that power goes out or your printer has an error during printing, push the Carriage
back all the way to the left to dock it and use the Fixing Pin to lock it in place (see images above).
)LMVYLYLÄSSPUN[OLI\SR^OP[LPUR[HUR`V\OH]L[VHNP[H[L[OL^OP[LPURJVU[HPULY>OLU^OP[L
ink is left idle for a period of time, ink separation occurs, where sediments from the ink start to
settle at the bottom of the container. Sediments must be removed through proper agitation of
[OLJVU[HPULY),-69,ÄSSPUN[OL>OP[L0UR;HURV[OLY^PZL\UHNP[H[LK^OP[LPURJV\SKJYLH[L
HUPUJVUZPZ[HU[ÅV^VMPUR[OYV\NO[OLSPULZJH\ZPUNK\SSWYPU[ZHUKWV[LU[PHSKHTHNL[V[OL
ink delivery system.
HEAT PRESS SETTINGS FOR INK CURING
> Check the REAL temperature of the heat press with a probe or with strips to be sure that your garments
are properly cured for washability.
HEAT
PRESS INK
CURING
35
Seconds
10-20
PSI
0.7-1.4
Bars
356°F
180°C
