13
The printer can be restored to operational status after the storage
period by performing the following maintenance tasks before storage:
7SLHZLLTW[`[OLWaste ink Tank.
*OLJR[OLHTV\U[VMCleaning Solution in the cleaning liquid
tankHUKYLÄSS[OL[HURPMP[ZHTV\U[PZILSV^[OLWYVWLYSL]LS
Shake the white ink if the white ink cartridge agitation message
is displayed on the operation panel screen.
;OVYV\NOS`JSLHU[OLNozzle Guards, Wipers, Suction Caps and
Exhaust Caps.
7YPU[V\[HNozzle Check pattern for White and CMYK.
0MHUVUÄYPUNUVaaSLPZMV\UK!7LYMVYTHead Cleanings, run the
Nozzle Check prints and verify the result again. Continue same
process until the blocked nozzles are ALL OPEN again.
When Not Using Printer for a Long Period of Time
INK & SOLUTIONS STORAGE
HOW TO EXTRACT A LOG FILE FROM THE PRINTER
> Be carefull NOT to go below 32°F.
> Please ROTATE the White ink pouch boxes every week.
Every 2 Weeks of Inactivity Checklist
Menu
Maintenance
Log copy to USB
0UZLY[H<:)Z[PJRPU[OLMYVU[ZSV[VM[OLWYPU[LY[VILHISL[VJVW`[OLSVNÄSLHUKMVSSV^[OLZLZ[LWZ!
CMYK & White Inks, Cleaning Solution, Maintenance Solution & Pretreatment
Solution should be stored at a temperature range between a minimum of
32°F and a maximum of 104°F.
> When the printer will not be used for a prolonged period of time, follow appropriate procedures before
storing the printer according to the expected storage period and storage conditions. When in doubt, create
a ticket at BrotherDTG.com/Support for support.
WARNING:
DO NOT turn the printer OFF, otherwise, the printer may become DAMAGED.