Brother

5 INK POUCH REPLACEMENT BEST PRACTICE FOR PRINTING - A MUST! > If you are not trying to avoid wrinkles like explained above, you could get the errors 2084 & 2085 displaying: "Winding-up Failure" > Always keep the closest distance between the printheads and the surface of the garment. It is very important for the long life of your printer. Open the cartridge's lid on a ÅH[Z\YMHJL and remove the empty pouch. Carefully unpack a new ink pouch from its shipping carton. Push the green tip end of the ink pouch into the cartridge until it clicks into place. Straighten the ink pouch to align it with the gutter of the lid of cartridge, and mount in position inside the metal spring by pulling it with your hand. If the edge of the ink pouch is bent or wrinkled, smooth it out with your hands to remove wrinkles. Place the pouch in horizontal alignment with the cartridge. Ensure lines of the catridge and pouch are in alignment. Close the lid, and verify the spring is rolling to the front. If spring does not roll, smooth out wrinkles and try again. Place the cartridge at a 45° angle and push on the 2 upper metallic latches to add a bit more tension on the ink pouch. Double-check that you have not generated more wrinkles. Clean the outside of the green tip end that goes in contact with needle inside printer. Attach a shelf life sticker included with ink pouch onto the front of the cartridge. Good Gap Excessive Gap

• Cover