Brother

GTXpro Daily Operations Guide [H]

Issue link: https://docs.hic.us/i/1453905

Contents of this Issue

Navigation

Page 7 of 13

8 DEFLECTION & FLASH FIRING WEEKLY MAINTENANCE +LÅLJ[PVU appears as odd bunched up or gapped lines where the horizontal bars will appear blurred and staggered. When this is present you will want to perform 2-3 Flash Fire Cleanings. After performing a Flash Fire Cleaning 2-3 times, perform another Nozzle Check to test the results. fig. 1 fig. 2 Only a few nozzles missing: Perform a Powerful Cleaning More than 10 nozzles missing: Perform a Super Cleaning > Perform a new Nozzle Check after Head Cleaning to check the result and redo the cleaning up to 3 times. Ensure all other maintenance has been performed such as cleaning the cap and wiper blade and see that the wiper cassette is fresh and still has moisture. If there is no improvement by the 4th time, please contact support. > If this does not resolve the matter, please visit BrotherDTG.com/Support to contact Brother Support. Head Cleaning Menu Menu Flash Cleaning ZLSLJ[7YPU[ Heads %(S^H`Z\ZL[OPZTLU\[VWLYMVYTJSLHUPUNZVYYLWSHJLWHY[Z! To achieve successful weekly maintenance you will have to do the following actions: Maintenance Maintenance Part Clean/Replace • Suction Cap Cleaning • Exhaust Cap Cleaning • Wiper Cleaning • Nozzle Guard Cleaning • Visual Inspection WARNING You will have 15 minutes to complete any pending items for the maintenance process. Prepare to complete all items within the allotted time. 15 Min

Articles in this issue

Links on this page

view archives of Brother - GTXpro Daily Operations Guide [H]