10
WEEKLY MAINTENANCE: Nozzle Guard Cleaning
> DO NOT empty the remaining Cleaning
Solution from the Cleaning Cup into the
Maintenance station. Empty it into the
Waste Tank below the printer.
MAINTENANCE PARTS EXCHANGE
Menu
%(S^H`Z\ZL[OPZTLU\[VWLYMVYTJSLHUPUNZVYYLWSHJLWHY[Z!
In case of Warning/Error messages for parts replace, please follow the following procedures:
• Wiper Cleaner Replacement
• Flushing Foam Replacement
• Fan Filter Replacement
Maintenance
Maintenance Part Clean/Replace
Wipe clean the 2 nozzle guards (1) & (2) with the Clean Stick R dipped in Cleaning Solution.
Make sure to clean and remove any dried ink in the nozzle guard port holes. Clean the
metallic parts (4) & (5) of the printhead in the same way.
A very important place to clean is area (6) between the nozzle guard and nozzle plate.
Be sure NOT to touch the nozzle surface (3) at all.
> Manually move the carriage to such a position that you can perform the cleaning with ease.
WARNING
You will have 15 minutes to complete
any pending items for the maintenance
process. Prepare to complete all items
within the allotted time.
15
Min
