1.3 Exhaust System
4
The ON area should be well ven�lated. The exhaust should be installed in such a way build-up of
fumes in minimized. Best loca�on for the exhaust should be at the lowest level, this way the fumes
build-up is minimized. Flush fumes are heavier than air, so fumes build-up concentrates on the
lower level of the room.
1.4 Handling Precau�ons
Power supply
Install the machine near an easily accessible electrical outlet. 220V, 40 Amp is the recommended power supply.
Do not provide power to the machine through the same power line as for other noise
genera�ng devices such as motors. Use a dedicated circuit.
Connect the power cable directly to an electrical outlet. Do not plug several devices into one
electrical outlet. Do not use any type of outlet strips.
Machine Placement
Do not place anything on the top of the machine.
Do not rest your elbows on the machine.
Open and close the top cover gently from the front of the machine with both hands.
Before connec�ng or disconnec�ng the interface connector, turn the machine OFF.
