12
3
Remove the pinch rollers.
4
Replace the O-rings and pinch rollers.
5
Attach the pinch rollers and secure them with
the O-rings.
6
Turn the power on.
Replacing fan filters
Replace the blowing fan filter if it is dirty.
1
Remove the fan filter cover.
• Push the fan filter cover claw outward, and pull the
cover to the front.
2
Remove the filter.
3
Mount a new filter, along with the fan filter
cover.
• Push in the fan filter cover until the tab clicks.
Replacing cutter blades
Replace cutters when blades are chipped or blunt.
1
With the screen in local mode, select [MENU] >
[MAINTENANCE], and then press the [ENTER]
key.
• The Maintenance menu is displayed.
2
Select [STATION MAINT.] > [CARRIAGE OUT] >
[STATION MAINT.], and then press the [ENTER]
key.
• The carriage moves over the platen.
• Turn off the main power supply and unplug the
power cable before carrying out maintenance.
O-ring
Pinch roller
Tab
Fan filter cover
• Avoid touching the cutter blade. Failure to do so
may result in injury.
• Avoid storing this product in locations accessible
to children.
Blowing fan filter
Carriage
