Issue link: https://docs.hic.us/i/1518963
6 1 On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key. • The Maintenance menu is displayed. 2 Select [Station Maint.] > [Carriage Out] > [Station Maint.], then press the [ENTER] key. • The carriage moves over the platen. 3 Clean the NCU. • Wipe off any ink and dust adhering using a cleaning stick moistened with maintenance liquid. Wipe off the maintenance liquid. Make sure none remains. 4 Press the [ENTER] key after cleaning. Cleaning the waste ink draining channel To prevent clogging of ink due to ink coagulation in the waste ink draining channel, clean the draining channel regularly (about once a week). 1 With the screen in local mode, select [MENU] > [MAINTENANCE], and then press the [ENTER] key. • The Maintenance menu is displayed. 2 Select [STATION MAINT.] > [PUMP TUBE CLEANING], and then press the [ENTER] key. • The carriage moves over the platen. 3 Press the [ENTER] key. • The cap is filled with maintenance liquid (if the maintenance liquid cartridge is usable). • Check whether the cap is filled with maintenance liquid. • Pressing the [FUNC2] key enables additional filling with maintenance liquid. 4 Press the [ENTER] key. • Pump tube (ink discharge channel below the cap) washing starts. Cleaning head nozzles 1 With the screen in local mode, select [MENU] > [MAINTENANCE], and then press the [ENTER] key. • The Maintenance menu is displayed. 2 Select [STATION MAINT.] > [NOZZLE WASH], and then press the [ENTER] key. • The carriage moves over the platen. 3 Clean the wiper and bracket, and then press [ENTER] key. • P.1-3 Cleaning the wiper and cap 4 Clean the cap rubber and press the [ENTER] key. • P.1-3 Cleaning the wiper and cap • At this time, the channel is cleaned automatically. 5 Press the [ENTER] key. • The carriage moves over the platen, and the cap is filled with maintenance liquid (if the maintenance liquid cartridge is usable). • Check whether the cap is filled with maintenance liquid. • Insert the cleaning stick as far as the line shown in the illustration. • If the maintenance liquid cartridge is usable, suck maintenance liquid into a dropper and fill up the cap with it. Fill up the cap with maintenance liquid on the verge of overflow from the cap. [TxF150-75] [TxF300-75] Illustration:TxF150-75